GSI Webinar: MSE Wall Back Drainage Design

The Geosynthetic Institute will host its next GSI Webinar on 25 October 2017. The topic is MSE Wall Back Drainage Design.

GSI Webinars are 80-minute sessions (with Q&A time added to the end) on the second Wednesday of every month at 11:30 am (EDT). Participants may be eligible to receive 1.5 professional development hours (PDHs) with completion of a 10-question multiple choice test following the webinar.

GSI Webinar - MSE Wall Back Drainage Design

REGISTER ONLINE

COST

GSI Members – $200.00
Non-Members  – $250.00

The webinar will be led by Dr. Robert M. Koerner, GSI Director Emeritus.

MSE WALL BACK DRAINAGE DESIGN

By Robert Koerner – GSI’s database of failed mechanically stabilized earth (MSE) walls includes details on 301 walls that had been reinforced with geogrids or geotextiles. Of those failed walls, 64% failed due to water.  Furthermore, 73% have been constructed with fine grained silt and/or clay soils. Taken together, these low permeability backfill soils do not drain easily and instead build up hydrostatic pressure leading to the large number of failures.

RELATED: MSE Wall Failures vis-à-vis the Lack of Geotechnical Filters

In order to avoid such pressures, back drainage is necessary between the reinforced and retained soil zones.  This webinar is focused entirely on the proper design of this back drainage zone and its outlet system beneath the reinforced soil zone.  The design is applicable to sand as the back drainage material, however, its near vertical orientation lends toward geocomposite drainage systems.  Ten different geocomposites are tested for their transmissivity and illustrated in the four numeric examples that are presented.  In all cases a flow rate factor-of-safety is developed and assessed accordingly.

Participants will understand how internal and external water enters and acts upon the reinforced soil zone of MSE walls when constructed with low hydraulic conductivity silt and clay soils.  The avoidance of hydrostatic pressure using geocomposite drains is the key in this regard.

Technically, proper flow rate factor-of-safety calculations will be formulated by comparing allowable flow rates (using a transmissivity test) with required flow rates (using a finite difference approach).  Numeric examples are presented to specifically illustrate the design process.

Learn more about GSI webinars and register for MSE Wall Back Drainage Design at http://www.geosynthetic-institute.org/webinar.htm.

GSI Webinar MSE Wall

**

View other presentations from GSI’s Dr. Robert Koerner at www.geo-u.com, where additional presentations on MSE Wall Remediation and Monitoring, MSE Wall Inspection, and many other applications are available on-demand.

0

Leave a Reply

Your email address will not be published. Required fields are marked *