|
06/30/08
New ASTM Work Items
WK20438 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit is a revision to Standard D5030-04
WK20433
Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer is a revision to Standard D7382-07
06/09/08
New Approved ASTM Standards
D1622 - Standard Test Method for Apparent Density of Rigid Cellular Plastics has been revised to D1622-08
D1710 - Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes has been revised (with title change) to D1710-08
D3839 - Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe has been revised to D3839-08
D6289 - Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics has been revised to D6289-08
New ASTM Work Items
WK20145 - Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit is a work item revision to existing standard D4477-04a
WK20146 - Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit is a work item revision to existing standard D4477-04a
WK20184 - Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials is a work item revision to existing standard D5491-03
06/02/08
New Approved ASTM Standards
D2665 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings has been revised to D2665-08
D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials has been revised to D3350-08
D4101 - Standard Specification for Polypropylene Injection and Extrusion Materials has been revised to D4101-08
D6779 - Standard Classification System for Polyamide Molding and Extrusion Materials (PA) has been revised to D6779-08a
05/27/08
New Approved ASTM Standards
D1598 - Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure has been reapproved, available as D1598-02(2008)
D2661 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings has been revised to D2661-08
D638 - Standard Test Method for Tensile Properties of Plastics has been revised to D638-08
WITHDRAWN F1380 - Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) has been withdrawn, with no replacement. F1380-95a(2002)e1
F1804 - Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation has been revised to F1804-08
F628 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core has been revised to F628-08
New ASTM Work Items
WK19971 - Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings is a work item revision to existing standard D2513-07b
WK20006 - Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes is a work item revision to existing standard D4437-08
05/21/08
New ASTM Work Items
WK19874 - Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method is a work item revision to existing standard F2634-07
REINSTATEMENT WK19929 - Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2008) is a work item for the reinstatement of the withdrawn standard D629
05/11/08
New Approved ASTM Standards
WITHDRAWN D5733 - Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure (Withdrawn 2008) has been withdrawn, with no replacement. D5733
WITHDRAWN D629 - Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2008) has been withdrawn, with no replacement. D629
D7179 - Standard Test Method for Determining Geonet Breaking Force has had an epsilon edit, available as D7179-07e1
F2080 - Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe has been revised to F2080-08
05/08/08
New Approved ASTM Standards
D4437 - Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes has been revised (with title change) to D4437-08
D5779 - Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control has been revised to D5779-08
New ASTM Work Items
WK19740 - Standard Guide for Labeling of UV-Protective Textiles is a work item revision to existing standard D6603-07
WK19777 - Standard Specification for Greige Woven Glass Fabrics is a work item revision to existing standard D579-04
WK19778 - Standard Specification for Finished Woven Glass Fabrics is a work item revision to existing standard D4029-04
NEW WK19797 - Test Method for Determing Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (PLE)
WK19798 - Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins is a work item revision to existing standard D5227-01
04/22/08
New
Approved ASTM Standards
D1243 - Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers has been reapproved, available as D1243-95(2008)
D2565 - Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications has been reapproved, available as D2565-99(2008)
D2774 - Standard Practice for Underground Installation of Thermoplastic Pressure Piping has been revised to D2774-08
F2023 - Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water has been revised to F2023-08
New ASTM Work Items
WK19542 - Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock is a work item revision to existing standard F2206-02
WK19555 - Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing is a work item revision to existing standard F2145-01(2007)
NEW WK19571 - Practice for Requirements for New Pipe and Fitting Materials for Gas Distribution Systems
WK19572 - Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings is a work item revision to existing standard D2513-07b
NEW WK19580 - Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic MAterials under ACcelerated Bioreactor Landfill Conditions
WK19581 - Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings is a work item revision to existing standard F1498-00e1
WK19583 - Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems is a work item revision to existing standard F1412-01e1
WK19588 - Standard Test Method for Pendulum Impact Resistance of Plastic Film is a work item revision to existing standard D3420-95(2002)
WK19591 - Standard Test Method for Density of Polyethylene by the Ultrasound Technique is a work item revision to existing standard D4883-03
WK19599 - Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus is a work item revision to existing standard D1424-07a
|
