Agru’s geocomposite is available in both single sided and double sided products with geonet core thicknesses from 200 mil to 350 mil and fabric ranging from 4 oz to 12 oz. The geotextile is bonded to the geonet with a hot knife application allowing for high bond strength without the reduction of transmissivity values of other processes. Agru geocomposite is synthetic drainage media designed to replace one to two feet of traditional aggregate while providing the design required drainage under site loads, gradients and site conditions.
For geosynthetics-related applications, Burke’s geomembranes have exhibited excellent weather resistance, chemical resistance, and design flexibility. As liners and covers, these geomembranes have improved water and wastewater systems, enabled dependable anaerobic gas collection for flaring or power conversion, reduced costs and increased output for industrial and aquaculture operations, and much more.
CETCO Lining Technologies provides practical solutions to todays environmental problems. A full-services, global, environmental company, CETCO Lining Technologies Group provides quality products that are both cost effective and sensitive to the preservation of the environment. Akwaguard® Pond Liners complement the existing Akwaseal® Pond Liners introduced in 2005. The Akwaguard® liners are prefabricated PVC panels, while the Akwaseal® Liners are a two-in-one system incorporating both sodium bentonite clay and geomembrane water barriers.
Concrete Canvas® GCCM (Geosynthetic Cementitious Composite Mat) is a flexible concrete-impregnated fabric that hardens on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. Essentially, it’s concrete on a roll. Concrete Canvas® GCCM can be laid at a rate of 200sqm/hour and it is available in man portable rolls for applications were access to site is limited. The concrete is pre-mixed so there is no need for mixing, measuring or compacting: just add water. The speed and ease of installation means Concrete Canvas® GCCM is more cost-effective than conventional concrete, with less logistical burden; it is a low mass, low carbon technology which uses up to 95% less material than conventional concrete. Concrete Canvas Ltd. manufactures this ground-breaking material technology. Originally developed for the award-winning Concrete Canvas Shelters (the “building in a bag”), Concrete Canvas® GCCM has extended into the larger civil and geotechnical engineering community. Applications include water conservation, canal lining, wastewater management, mining, irrigation canals, and much more. Concrete Canvas Ltd. is active globally. Visit www.concretecanvas.com for more information and to find a provider near you.
Cooley Engineered Membranes, a Cooley Group company, produces a broad range of impervious synthetic geomembrane products. Our liners and floating covers, tank covers and seals, and underground storage products are developed specifically to meet the ever widening environmental and related needs of the commercial, manufacturing and construction industries also the municipal, state, and federal governments, as well as the military.
CTM Geosynthetics is a Geogrid Manufacturer from India founded in 2012. We are manufacturing Woven Polyester Uniaxial & Biaxial Geogrid with latest 4th generation German Machinery. The company has a core expertise in the production of Geogrid.
We have assembled one of the most experienced team of technicians and employees in the industry. Our repair department is stocked with an extensive inventory of parts and accessories for all of the Demtech equipment and many of our competitor’s equipment as well. We have everything in place and are considered to have one of the “fastest repair turn-around times” in the industry.
Diamond Grid is a highly engineered, cost-effective solution for erosion control and soil and turf stabilization. The unique design is up to 100% permeable. The innovative Diamond Grid product is manufactured from 100% recycled polypropylene.
East Coast Erosion Control offer a variety of benefits, including the prevention of soil loss due to water or wind, and elimination of sediment run-off in ponds and drainage channels or onto dry areas. The blankets are ideal for protecting seed, and provide optimum conditions for establishing plant growth. Offering products that provide short-term, extended-term, and permanent soil protection, East Coast Erosion Blankets are three dimensional in structure, allowing for optimal rainfall absorption, creating ideal conditions for maximum seed germination.
GeosIndex is a unique tool used to identify, compare and select geosynthetics that meet your project design and specification needs. Access detailed information on Drainage Materials, Erosion Control Products, Geotextiles, Geomembranes, Geogrids, GCLs and other geo-products from manufacturers and distributors around the world.
GSE is a global manufacturer and marketer of geosynthetic lining solutions, products and services used in the containment and management of solids, liquids, and gases for organizations engaged in waste management, mining, water, wastewater and aquaculture. Headquartered in Houston, Texas, USA, GSE maintains sales offices throughout the world and manufacturing facilities in the United States, Chile, Germany, Thailand and Egypt.
For over 150 years, HUESKER has operated as a family-owned, global geosynthetics manufacturer known for its long-term design strength and durability system solutions. HUESKER offers the most complete line of geogrids, geocomposites and geotextiles that deliver cost-effective geotechnical engineering solutions. HUESKER operates the following business units: Earthworks and Foundations, Roads and Pavements, Environmental Engineering, Hydraulic Engineering, Industry & Agriculture and Mining. For more information on HUESKER please visit www.HUESKER.com or call 800-942-9418.
I-CORP INTERNATIONAL is a completely independent international geosynthetic materials performance consulting and testing company. Dr Ian D. Peggs, President, is a materials scientist/engineer with over 25 years experience working with engineering plastics; welding, durability, stress cracking, nondestructive testing, microstructure, residual stress, leak surveys, failure analyses, and expert witness work. I-CORP has clients in over 40 countries. We help resolve materials performance problems. Visit Website
Imagine Intelligent Materials is the leading Australian developer of graphene-based coatings for industrial textiles and fibres. Imagine IM’s coatings solutions are delivered as masterbatch and can be incorporated into geotextiles, geogrids, and geomembranes. Imagine IM’s value proposition is to improve both product performance and economy for its licensees. Its primary commercial partner in Australia is Australian geotextiles market leader, Geofabrics Australasia. The company was founded in 2014 to create disruptive solutions that utilise graphene and can be integrated into existing manufacturing processes. This means that we can incorporate the unique capabilities of graphene into geosynthetics. More importantly our licensees achieve improved ROI while delivering technological solutions that meet regulatory standards. We specify the graphene chemistry and monitor the manufacturing processes at every step to ensure product replicability. We are all about attention to detail. Imagine IM’s certification means participants in the supply chain can integrate graphene into manufacturing processes without risk. Imagine IM’s first products for the geosynthetics industry will be announced at GeoAmericas 2016. Imagine IM believes in the potential of graphene-enhanced materials to change the world we live in. With our market entry product together with imgne™ certification, we provide assurance at each step of the manufacturing process, even when manufacturing in huge volumes. Imagine IM is establishing operations in the key global marketplaces of the USA and Europe during 2016 and 2017. Graphene is the most electrically conductive material known, it can be impervious to all gases, can deliver strength greater than steel and is harder than diamond. Graphene has controllable chemistry that allows tailored interactions with other materials such as hydrophobicity or hydrophilicity. We invite you to learn more about Imagine IM and and how our graphene solutions may benefit your geosynthetics product offerings. Visit www.imgne.com for more information about graphene technology in manufacturing. Imagine Intelligent Materials.
The International Erosion Control Association (IECA) is the world’s oldest and largest association devoted to helping members solve the problems caused by erosion and its byproduct—sediment. IECA connects you to 3500 members who specialize in stormwater management and natural resource protection.
International Lining Technology (ILT) is a leading supplier and installer of geosynthetics and geomembranes for ponds, pits, tanks, canals, landfills, mining, oil and gas operations, coal ash, wastewater, agriculture, secondary containment, and many other applications and industries. Founded in 2002 in Reno, Nevada, ILT has an office in Houston, Texas to better serve our clients in the eastern United States and abroad. International Lining Technology has a special relationship with professional engineers around the globe because engineers know they can count on ILT to “seal the deal” every time, whether it’s sourcing materials, discussing issues and developing innovative solutions to challenging problems, or relying on our extensive experience with nearly every imaginable pond lining or geosythetic/ geomembrane installation situation. Best of all, ILT backs up our workmanship with our proprietary “No Unhappy Customers” Guarantee.™ Your business means the world to us. For a competitive bid or more information, please contact International Lining Technology toll-free at 1-866-740-2929 or visit www.intlining.com.
Leister is a long-established Swiss company, consistently dedicated to customer satisfaction. This is ensured through extremely high production quality, permanent innovation, a wealth of experience shared by its employees and above-average service.
Low & Bonar products are manufactured and marketed globally under the brand Enka Solutions and includes products like Enkamat, Enka-Force, Enkadrain, Enkagrid and Colbonddrain.
Founded in 1879, Maccaferri works in partnership with its clients, offering technical expertise and a full product range to deliver versatile, cost-effective and environmentally sound solutions to the global construction industry. A vertically integrated company, Maccaferri develops, manufactures, designs, supplies and installs solutions from erosion protection to reinforced soil structures and from landfills to ground stabilisation. Although renowned as the undisputed leader in the manufacture and supply of gabions and associated wire mesh products to the global construction industry, Maccaferri now supplies and manufactures a wide range of geosynthetics including geogrids, drainage geocomposites, geomats, geomembranes and geotextiles. Every day, our teams of engineers, based in over 100 countries, provide our clients technical support, advice, designs, products, and solutions to their problems. From a local erosion problem to the tallest reinforced soil walls on earth, we await your next challenge! Visit Website
Machina-TST is an ISO 9001-certified manufacturer geosynthetics. Products include geogrids, geotextiles, turf reinforcement mats, and geocomposites (e.g., geotextile-geogrid composites). These materials are utilized in road construction, mining, embankments on soft soil, oil and gas applications, erosion control, railways, and elsewhere.
NAUE GmbH & Co. KG (ISO 9001:2000 certified) is a worldwide operating company, manufacturing the full range of geosynthetics (geotextiles, geomembranes, GCLs, geogrids, drainage systems and erosion control mats) for all applications. They also offer support to assist with even the most challenging projects. NAUE geosynthetics are found in all applications including: Landfills, Mining Groundwater Protection, Civil Engineering, Tunneling and Waterproofing and Hydraulic Engineering.
Owens Corning now offers three RhinoMat™ products that meet the new GRI-GM30 standards for properties and manufacturing control of coated tape polyethylene barriers. RhinoMat is a reinforced polyethylene geomembrane that offers hydrostatic resistance for buried and unburied containment applications. It is specifically designed for containment in critical situations, such as for preserving precious land and water supplies.
PlastaFlex geomembranes meet the intense long-term durability and resilience challenges found in waste management, chemical processing, natural gas, and aquaculture industries. PlastaFlex geomembranes are guaranteed to withstand extreme temperatures, deliver exceptional tensile and puncture strength, and resist even the harshest chemical attacks.
PLASTIKA KRITIS is one of the leading European producers of geomembranes, agricultural films and masterbatches. The company’s strong international presence includes affiliate companies in France, Romania, Poland, Russia, Turkey, China and exports to over 60 countries around the world. The company manufactures geomembranes since 1992. Its product range includes HDPE, LDPE, LLDPE, EVA & fPP membrane liners at thicknesses of 0,3-2,5 mm (12-100 mil). As of 2015 PLASTIKA KRITIS specializes in EVOH gas barrier geomembranes with advanced seven-layer production technology, for use as radon barrier, methane barrier, landfill capping and other applications where it is necessary to limit the permeation of gases through the liner. Unique to the company is its ability to manufacture in-house the carbon black and additive masterbatches and compounds that are used for geomembrane production. This ensures that the quality of the products is controlled from A to Z and that the most suitable formulations are used to ensure optimum performance. Products can be supplied out of three manufacturing locations (Greece, France and China), ensuring security of supply and optimized transport costs and efficient delivery. This supply flexibility, combined with the manufacturing expertise and capabilities, has earned PLASTIKA KRITIS international recognition an experienced, highly competitive manufacturer with outstanding quality and reliable service. Learn more at www.plastikakritis.com/en.
Presto Geosystems offers 30 years of best-in-class experience, innovation, products, service and support. Presto provides cost-saving and eco-friendly soil stabilization and stormwater solutions. The Geoweb soil stabilization system is beneficial for slope/channel protection, vegetated retaining walls and load support applications. GeoRunner transition mats effectively prevent scour in culvert outfalls, shorelines, and stormwater channels. Geoblock and GeoPave permeable pavement systems protect turf and stabilize aggregate in traffic areas.
Propex GeoSolutions is a global leader in geosynthetic solutions for earth stabilization and erosion and sediment control. Key markets for Propex GeoSolutions include Flood Protection, Transportation, Erosion Control, Energy and Natural Resources, Residential and Commercial Construction, and Golf Course Construction.
Raven Engineered Films is an innovative 60 year manufacturer of geomembrane liners and covers. From super-stabilized membranes meeting the GRI-GM Standard Specifications to critical NSF certifications, we have an extensive product line to encompass custom and standard performance requirements. Available thicknesses range from 6 mil reinforced to 45 mil dense reinforced geomembranes, and up to 80 mils in co-extruded sheeting. We offer a complete line of proprietary gas barriers and reinforced membranes in smooth or textured from 20 to 80 mils. Raven also designs unique specialty cast composite materials, textured membranes, and lamination sheeting built to precise specifications. Raven 7-layer engineered geomembranes provide the latest technology in containment solutions to control odors, methane, and harmful VOCs. Our manufacturing expertise is what sets us apart from the competition by offering some of the most diversified capabilities in the industry, as well as our high standards for one-on-one customer service. We believe by thoroughly listening to our customers we can develop a solution that does precisely what they require. Raven operational facilities include four locations spanning across a 605,000 sq.ft. footprint and houses the latest state-of-the-art equipment, including blown and cast film and sheeting, lamination/coating, conversion capabilities in addition to an impressive GAI-LAP accredited testing and development facility. All Raven products are developed and produced in a quality controlled environment under our stringent ISO 9001 certified management system to assure we achieve complete customer satisfaction and continuous improvement in all phases of our business. Raven is fully committed to creating sustainable product solutions, and internally houses a full-scale polymer reclamation center to capture excess polymers in-line with our green initiatives. Our extensive history in manufacturing and proven product expertise allows us to offer the most innovative and targeted product solutions in the industry today! Raven Industries’ ultimate purpose is to solve great challenges. We realize our vision by developing innovative solutions to great challenges related to the markets we understand and serve. Today, those solutions are focused on feeding and connecting the growing world population, preserving natural resources, and answering the growing need for security. Raven Engineered Films is committed to producing essential film and sheeting for the containment and protection of earth’s natural resources. We are dedicated to developing targeted product solutions that not only solve precise application challenges, but integrate sustainable environmental design practices for long-range performance. Typical Geomembrane Applications include: Pond & Lake Liners, Containment Liners, Floating Covers, Methane Barriers, Canal Liners, Landfill Interim & Rainshed Covers, Landfill Caps, Coal-Ash Covers, Leach Heap Liners, Brownfield PE Gas Barriers, Geofoam Encapsulation, Oilfield Pit & Pad Liners, and many others. Visit Website
SAGEOS – Canada’s State-of-The-Art Geosynthetic Laboratory
Founded in 1988 to provide Canada with technical resources for geosynthetics, CTT Group’s Geosynthetics Division, known as SAGEOS, offers innovative R&D services, reliable laboratory testing and independent expertise to manufacturers, engineers and contractors seeking technical answers and solutions for projects that involve geosynthetics.
Solmax is positioned among the top three worldwide leaders in the manufacturing of geomembranes and offers both containment and fluid transportation solutions including HDPE pipes, valves, fittings and accessories. Manufactured from Varennes (Canada), Kuala Lumpur (Malaysia) and Santiago (Chile), its products are sold in over 60 countries and are used by the biggest names in the mining, petroleum, waste management, water, and civil engineering sectors. Solmax products are vital in protecting soils from contamination in applications as critical as the landfills of the world’s most populated cities to the mines operating in environmentally fragile ecosystems. Its vision: Covering the World, Protecting the Earth.
SOTRAFA, S.A. belongs to the Armando Alvarez Group, the largest one transforming plastics in Spain.
Strata Systems is a manufacturer of advanced soil reinforcement products with global distribution and technical resources to meet the challenging and changing dynamics of any site development including highway, municipal, commercial and residential projects. Strata provides innovative systems and technology that provide economic advantages while ensuring structural integrity and sound engineering principles.
TenCate Geosynthetics commercial division is the world’s leading provider of geosynthetics. Through the processing of synthetic raw materials, we develop, manufacture, and provide innovative solutions which enhance the performance of our customers products. Our application knowledge is vast in the markets we serve, from transportation construction, mechanically stabilized earth, and shoreline protection, to name a few, as we continue to set the standard for geosynthetics use throughout the world.
Over the last 50 years, Terre Armée has forged an unrivalled level of expertise and experience in reinforced backfill applications and soil-structure interaction. The company has set the gold standard in reinforced earth structures and has played an active role in over 50,000 projects around the world.
Thrace-LINQ is a global manufacturer and supplier of geosynthetics for a wide variety of civil applications. Part of the Thrace Group along with Thrace NG and Lumite. Thrace-LINQ possesses a significant presence in woven and nonwoven geotextiles, with key markets including roads and railways, industrial engineering, mining, agriculture, and more.
Titan Environmental Containment Ltd. specializes in the supply and installation of geomembrane liners, bolted steel tanks, and welded tanks. We partner with industries from coast to coast to provide a wide range of extremely high quality environmental products, along with cost effective solutions for your projects.
TRI/Environmental, Inc. (TRI) is an independent, third party, geosynthetics firm providing geosynthetics testing and research services to the international community. TRI provides laboratory conformance/verification testing as well as performance related studies. In addition to routine testing, TRI provides interface friction, permeability, creep and stress-rupture, transmissivity, gradient ratio, UV-resistance, chemical resistance, carbonyl end group, molecular weight, plastic pipe and accelerated time-temperature testing. TRIs personnel are active throughout the worlds standards development organizations and routinely provide short courses, seminars and tailor made training services to those learning about geosynthetics.
PROTECT YOUR LINER. Varicore Technologies manufactures Multi-Flow Drainage Systems and LDVS Drain/Vent Systems (Leak Detection Venting System). With over 20 years of project experience and with tens of millions of feet produced, Varicore maintains an excellent record in the drainage and venting mitigation industry. Superior quality. Modularity. System scalability. Cost-effective.
Viking Containment Systems provide high quality environmental products and services. Our extensive experience in liner construction makes us New Zealand’s leading supplier and installer of geomembrane liners for environmental protection and critical containment.